Labor & capacity planning

Space & Storage Capacity

Separate physical capacity from usable operating capacity, then see what today’s inventory and near-term movement do to the space you actually have available.

Storage assumptions

Enter a quick capacity snapshot manually, or load a location-level WMS export and let LogisticsDeck count the locations for you.

Examples: QA hold, staging, dedicated customer space, or positions you intentionally keep unavailable to normal stock.
Position-based planning model. This tool assumes one occupied storage unit consumes one configured position. It does not calculate rack engineering, fire-code clearance, aisle geometry, floor loading, or structural capacity.
Capacity layers

Physical space is not the same as operating space.

The visual separates unavailable/reserved positions from usable positions and then shows the portion of usable capacity you are intentionally willing to occupy.

Ready
BlockedReservedProjected occupiedPhysical headroomTarget maximum
Occupancy sensitivity

See how the operating ceiling changes.

Compare the same usable warehouse at several target occupancy levels. A higher ceiling creates more nominal capacity, but it also leaves less room for slotting, putaway, replenishment, and day-to-day variability.

Next in this workflow

Dock Planning

Once labor and storage are understood, the next constraint is whether receiving and shipping workload can move through the available dock doors and appointment windows.

Continue to dock planning →
Warehouse space guide

Measure usable storage capacity, not just physical locations

Total rack or floor positions rarely equal practical operating capacity. Blocked locations, reserved space, staging requirements, slotting constraints, and the occupancy ceiling you choose all reduce the space that can be used safely and efficiently.

Enter a manual snapshot or map a location-level WMS export to estimate current occupancy, projected occupancy, and operating headroom. When importing data, confirm whether the export includes empty locations so the denominator represents the real location population.

Next: compare the operating plan with dock-door capacity →

How is warehouse storage capacity utilization calculated?

Compare occupied positions with usable storage positions, using the same storage unit on both sides. This planner subtracts blocked and reserved positions from total positions, then applies your target occupancy to establish planning capacity. Expected inbound and outbound quantities show projected pressure. A target is an operating assumption, not a universal definition of full; access, putaway rules, and product compatibility can constrain usable space.

Formula

Usable positions = total − blocked − reserved. Planning capacity = usable positions × target occupancy. Projected occupied positions = max(0, current + inbound − outbound). Projected utilization = projected occupied ÷ usable positions × 100.

Worked example

From 1,000 total positions, subtract 50 blocked and 50 reserved to get 900 usable. At an 85% target, planning capacity is 765. If projected occupied positions are 720, utilization is 80% of usable positions and headroom to target is 45 positions.

Common questions

Is 100% utilization a good target?

Not necessarily. Working room and access constraints may require a lower operating target; choose one for your operation.

Can pallets and cases be added together?

Only after conversion to a consistent storage unit with a defensible relationship.

Why subtract reserved positions?

This planner treats reserved positions as unavailable to the population being planned. Avoid counting the same unavailable position twice.