How to Estimate Warehouse Lines per Hour Without Actual Labor Hours

Your WMS export has the lines. It has the operators. It has timestamps down to the second.

What it does not have is the one number productivity needs: how many hours people worked.

That lives in payroll or timekeeping, and a lot of supervisors cannot get to it. Sometimes it is a permissions issue. Sometimes it is a three-day email chain with HR. Either way, the boss still wants to know the pick rate by Friday.

You can build a usable estimate without payroll data. You have to be clear about what you built.

What scan timestamps tell you

Scan timestamps show the span of recorded activity. If someone's first scan is at 7:30 AM and their last is at 5:00 PM, their scanning activity spanned 9.5 hours. Lunch, breaks, the morning meeting, waiting on replenishment, and helping unload a trailer can all affect how much of the shift was available for picking. Some work may happen before the first scan or after the last.

Dividing completed lines by 9.5 gives you lines per hour of recorded activity span. Measuring lines per labor hour requires labor hours for the same work and period.

Build the hours yourself

You already know more about the workday than the export does. Write it down.

  1. Count the lines. Confirm that one row represents one completed line before counting rows. If the export records multiple scans for a line, count completed lines using the line identifiers.
  2. Count the person-days. One person working in the process on one day counts as one person-day. Subtract known absences and record any attendance you had to assume.
  3. Set the hours per day. Start with the scheduled shift and subtract unpaid lunch or other unpaid time to estimate paid hours.
  4. Estimate available picking time if you need it. Subtract allowances for paid breaks, startup meetings, travel to the zone, and waiting from assumed paid hours.
  5. Divide and label the result. Divide completed lines by the total assumed hours for the same team and period. State which hours you used and how you estimated them.

Worked example

Made-up numbers, one month, one picking team.

InputValue
Completed lines in the export6,240
Pickers4
Working days21
Scheduled shift8.5 hours, including a 30-minute unpaid lunch
Assumed paid hours per day8.0

Version A. Lines per assumed paid hour

4 pickers × 21 days × 8.0 hours = 672 assumed paid hours.
6,240 ÷ 672 = 9.3 lines per assumed paid hour.

Version B. Lines per assumed productive hour

Subtract the following daily allowances from each person's assumed paid hours.

AllowanceHours per day
Two paid 15-minute breaks0.50
Startup meeting0.25
Travel, waiting, and idle time (estimate)0.75
Total1.50

8.0 − 1.5 = 6.5 assumed productive hours per day.
4 pickers × 21 days × 6.5 hours = 546 assumed productive hours.
6,240 ÷ 546 = 11.4 lines per assumed productive hour.

Same lines. Same people. Same month. The estimate increased by about 23% because the denominator changed.

Paid-hour estimates approximate output against scheduled paid labor time. Productive-hour estimates approximate output against the portion of the shift you assume was available for picking. Measuring actual productive labor requires observed picking time. Pick a basis, document it, and use it consistently across reporting periods.

What attendance does to the estimate

Four pickers scheduled for 21 days gives you 84 scheduled person-days. Suppose six person-days were lost to absences that month.

84 − 6 = 78 person-days.
78 × 8.0 hours = 624 assumed paid hours.
6,240 ÷ 624 = 10.0 lines per assumed paid hour.

Accounting for absences changed the estimate while the completed line count stayed the same. If you assume full attendance when people were out, you overstate hours and understate the rate. That effect is largest in the weeks with the most unaccounted absences.

Where this estimate breaks

  • Overtime. If overtime lines are in the count and the overtime hours are missing from the estimate, a heavy overtime week can look like a productivity jump.
  • People who do more than one job. If a picker spent two days on receiving, counting those hours against picking lines understates the picking rate.
  • Shared logins. If two people scan under one ID, use a roster or attendance record for headcount. The login alone cannot show who did the work.
  • Mixed work. Full-pallet pulls and each-picks from a mezzanine can take very different amounts of time. A shift in work mix can change the overall rate.
  • External benchmarks. Compare rates only when you know the sites use comparable work scopes, line definitions, and hour assumptions.

How to present it

Estimated 11.4 lines per productive hour. Based on 4 pickers, 21 days, and an assumed 6.5 productive hours per day. Source hours are based on the schedule and picking-time allowances.

Consistent assumptions make the estimate useful for trend monitoring. Changes still require operational context, including attendance, overtime, and work mix. Use actual hours for performance reviews, incentive pay, or other decisions that depend on knowing how many hours a person worked.

Doing it without the spreadsheet

You can do all of the above in Excel. It is a count, a few multiplications, and a division, repeated every time someone asks.

LogisticsDeck's Operations Review does the same thing as part of setup. Upload the export you already have, then enter the workday hours and allowances for breaks, idle time, or travel. The review calculates the rate from the hours you provide, labels it Estimated / Proxy, and shows what actual labor hours would let you calculate.